reset and beeps - please respond

Support for the UPS PIco HV3.0A Plus and UPS PIco HV3.0B Plus

reset and beeps - please respond

Postby MonkeyFarmer » Sat Feb 10, 2018 10:01 pm

I believe the software and hardware are installed correctly on a Pi 3.
The Pi is running with the latest version of Raspbian and the most recent patches applied.
There are no other applications running.

I installed a liFePO4 battery and set the register.

The UPS light blinks at about twice a second.
The charge light is on.

The UPS Pico H3.8B beeps now and then and it also reboots now and then.
After 24 hours of operation the battery remains at 16%

Note the Pico_Status version executed is Pico_Status_hv3.0 - I could find no later version.
|
V
***********************************
UPS PIco HV3.0A Status
***********************************

UPS PIco Firmware.....: f8
UPS PIco Bootloader...: 50
UPS PIco PCB Version..: 42
UPS PIco BAT Version..: LiFePO4 (ASCII : Q)
UPS PIco BAT Runtime..: 2 MIN
UPS PIco r232 State...: OFF

Powering Mode.........: RPi POWERED
BAT Percentage........: 16.0 %
BAT Voltage...........: 3.1 V
RPi Voltage...........: 4.9 V
NTC1 Temperature......: 31 C
TO-92 Temperature.....: 35 C
Extended Voltage......: 0.0 V
A/D2 Voltage..........: 0.0 V

PIco FAN Mode.........: DISABLED
PIco FAN State........: OFF
PIco FAN Speed........: 320.0 RPM

***********************************
Powered by PiCo
***********************************
MonkeyFarmer
 
Posts: 5
Joined: Wed Oct 11, 2017 9:45 pm

Return to UPS PIco HV3.0A Plus and HV3.0B Plus

Who is online

Users browsing this forum: No registered users and 1 guest