Serial with UPiS

Uninterruptible Power intelligent Supply Module

Serial with UPiS

Postby hotwire911 » Wed Feb 04, 2015 3:28 pm

Hello All,

I'm a bit of a noob to the UPiS, I've read the documentation a couple of times, but I'm not 100% here and don't want to destroy something.

In the past I've used a serial module (http://www.amazon.com/gp/product/B00BXX ... UTF8&psc=1) to pull up the serial I/O on the RPi to 5v, I'm looking to do exactly this again with the UPiS, from what I read you can pass thru the serial from the RPi into the UPiS and have it pull up the I/O (to either 5v or 12v), here are my questions:

1) What do I need to set the serial matrix jumpers to?
2) Will I be able to access the serial port with exactly the same methods that I was able to use with the traditional RPi serial?
3) Any other magic I should be aware of?

Thank you,

Hotwire
hotwire911
 
Posts: 3
Joined: Tue Feb 03, 2015 10:53 pm

Re: Serial with UPiS

Postby hotwire911 » Thu Feb 05, 2015 9:28 pm

Solved:

Figure 37 in manual for jumper settings.
/dev/TTYAMA0 is still device.
hotwire911
 
Posts: 3
Joined: Tue Feb 03, 2015 10:53 pm

Re: Serial with UPiS

Postby Pimaster » Fri Mar 13, 2015 10:51 pm

Hi, Good, thank you
BR PIM
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1593
Joined: Fri Sep 14, 2012 7:50 am


Return to UPiS

Who is online

Users browsing this forum: No registered users and 1 guest

cron