Pico ups keeps re booting

Support for the UPS PIco HV3.0A, UPS PIco HV3.0 A Plus, UPS PIco HV3.0A Terminal Block products, sd also for updated hardware HV3.0B

Pico ups keeps re booting

Postby Markymark » Thu Jul 27, 2017 10:43 am

Hi running raspian new install all settings done a install guide the unit does everything it should not shortly after shutting down it restarts again after about 5 seconds and keeps doing this cycle. Has anyone any ideas as to why.
Thakd
Markymark
 
Posts: 3
Joined: Thu Jul 27, 2017 10:36 am

Re: Pico ups keeps re booting

Postby daniel » Sun Sep 17, 2017 4:42 am

I have a similar issue. I have a RPi 3 running Jessie and kernel 4.4.34. The UPS PIco HV3 runs great with 0x24, which I have installed on about 10 units and have been running generally without issue for about a year. I'm looking at upgrading to 0x38, but want to make sure it's stable first. Functionally, it appears to work, but I can tell based on the "user leds" that the unit is restarting at least once a minute. This is problematic because I have a logging application that is leveraging the analog-in over i2c, and this feature is unavailable while the PIco is restarting. Does anyone have any thoughts on this?
daniel
 
Posts: 4
Joined: Mon Mar 27, 2017 6:04 pm


Return to UPS PIco HV3.0A and HV3.0B

Who is online

Users browsing this forum: No registered users and 2 guests

cron