PIco unable to communicate with Pi

Support for the UPS PIco HV3.0A, UPS PIco HV3.0 A Plus, UPS PIco HV3.0A Terminal Block products, sd also for updated hardware HV3.0B

PIco unable to communicate with Pi

Postby Elysium » Fri Mar 31, 2017 1:33 pm

Hi guys!

My Setup:

Raspberry Pi 2 B+
USB Pico HV3.0A

I followed the installation guide step by step (multiple times), enabled I2C and stuck the hat on, but it doesn't act like its supposed to. python pico_status_hv3.0.py only outputs the following:

Code: Select all

      UPS PIco HV3.0A Status

  UPS PIco Firmware.....:
Traceback (most recent call last):
  File "pico_status_hv3.0.py", line 186, in <module>
    print " ","UPS PIco Firmware.....:",fw_version()
  File "pico_status_hv3.0.py", line 29, in fw_version
    data = i2c.read_byte_data(0x69, 0x26)
IOError: [Errno 110] Connection timed out

pintest-utility from gpio shows that all PINs of my raspberry should be working correctly. Almost all LEDs of my UPS PIco are lit, and it just doesn't look like its working at all. I am unable to query its firmware version etc. Anyone got a hint?
Posts: 2
Joined: Fri Mar 31, 2017 1:27 pm

Return to UPS PIco HV3.0A and HV3.0B

Who is online

Users browsing this forum: No registered users and 2 guests