Terminal Block PCB compatibility

Support for the UPS PIco HV3.0A, UPS PIco HV3.0 A Plus, UPS PIco HV3.0A Terminal Block products, sd also for updated hardware HV3.0B

Terminal Block PCB compatibility

Postby sandrobilbeisi » Thu Jan 04, 2018 11:31 pm

Hello, I've noticed that the specifications for the 18650 battery holderd state : "This product is NOT COMPATIBLE with Terminal Block PCB."

single: http://www.pimodulescart.com/shop/item.aspx?itemid=48

dual : http://www.pimodulescart.com/shop/item.aspx?itemid=49


How are we to interpret this information ???
An explanation is necessary !
sandrobilbeisi
 
Posts: 13
Joined: Tue May 16, 2017 2:03 pm

Re: Terminal Block PCB compatibility

Postby Pimaster » Fri Jan 05, 2018 1:14 am

Hi,
Mechanically is not compatible, due to size of the 18650 battery holder, you can not fit-in the Terminal Blocks PCB. however you can use all I/Os on this side
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1611
Joined: Fri Sep 14, 2012 7:50 am

Re: Terminal Block PCB compatibility

Postby sandrobilbeisi » Fri Jan 05, 2018 4:50 pm

well,

but you can install the Terminal block PCB and keep the battery out of the way secured to another support ?
sandrobilbeisi
 
Posts: 13
Joined: Tue May 16, 2017 2:03 pm

Re: Terminal Block PCB compatibility

Postby Pimaster » Sat Jan 06, 2018 11:58 am

Hi,
If I understand you properly, yes
Just due to mechanical reasons, you can not have both PCBs on the same "constructions"
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1611
Joined: Fri Sep 14, 2012 7:50 am

Re: Terminal Block PCB compatibility

Postby sandrobilbeisi » Sat Jan 06, 2018 2:31 pm

well, we just give up using the screw supports on the battery holder

we will not affix it on the Pico PCB but rather on the external case we've designed
sandrobilbeisi
 
Posts: 13
Joined: Tue May 16, 2017 2:03 pm

Re: Terminal Block PCB compatibility

Postby sandrobilbeisi » Sat Jan 13, 2018 8:03 pm

why is there no option for adding a Terminals Block PCB
to the "UPS PIco HV3.0B HAT Stack Plus with Battery 450"
http://www.pimodulescart.com/shop/item.aspx?itemid=29
sandrobilbeisi
 
Posts: 13
Joined: Tue May 16, 2017 2:03 pm

Re: Terminal Block PCB compatibility

Postby Pimaster » Sat Jan 13, 2018 9:20 pm

Hi,
Because we done a mistake, thank you mentioning it.
Just overloaded
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1611
Joined: Fri Sep 14, 2012 7:50 am


Return to UPS PIco HV3.0A and HV3.0B

Who is online

Users browsing this forum: No registered users and 1 guest

cron