Pico HV3.0A software, etc with Original UPS PIco?

Support for the UPS PIco HV3.0A, UPS PIco HV3.0 A Plus, UPS PIco HV3.0A Terminal Block products, sd also for updated hardware HV3.0B

Pico HV3.0A software, etc with Original UPS PIco?

Postby RDK_Pi » Fri Dec 22, 2017 8:38 am

Just wondering if I put an SD card from a PiV3B with a PIco HV3.0A UPS board and related software into a PiV2 unit with an HV3.0A or into a PiB+ with one of your original UPS PIco boards, will it work? Thanks....RDK
User avatar
RDK_Pi
 
Posts: 51
Joined: Sun Nov 22, 2015 2:12 pm

Re: Pico HV3.0A software, etc with Original UPS PIco?

Postby Pimaster » Fri Dec 22, 2017 9:58 am

Hi,
Yes. It is exactly the same firmware 110% compatible between them. Some extra features we added to the Version B, are recalled automatically as bootloader for the B has information on which version firmware is running. So, firmware is smart enough to know where it is running. Today at the veering we will release new data sheet with all features got B.
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1611
Joined: Fri Sep 14, 2012 7:50 am


Return to UPS PIco HV3.0A and HV3.0B

Who is online

Users browsing this forum: No registered users and 2 guests