UPS Pico on Raspi3?

Support for the Uninterruptible Power Supply
with Peripherals and I2C control Interface
Raspberry Pi® B+, A+, B, and A

UPS Pico on Raspi3?

Postby Bytechanger » Fri Oct 07, 2016 5:29 am

Hi,

I´ve aleready the ups pico running on an raspberry 2.
Now I want to change to raspi3.
The reset pin is not at the same place.

Can I use the reset function, when I take a cable from reset pin place from ups pico to raspi3?
Where is the right place on raspi3?? Or is there no reset point at raspi3 ??

Greets

Byte
Bytechanger
 
Posts: 4
Joined: Sat Feb 27, 2016 9:13 pm

Re: UPS Pico on Raspi3?

Postby Pimaster » Mon Oct 10, 2016 4:26 pm

Hi,
You need to use a short cable to connect on the RPi 3 RUN pin
look here below

https://www.modmypi.com/blog/pico-ups-reset-wire
BR PiM
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1618
Joined: Fri Sep 14, 2012 7:50 am


Return to UPS PIco

Who is online

Users browsing this forum: No registered users and 2 guests

cron