Uploading firmware remotely

That allows to upload the new firmware directly from the RaspberryPi

Uploading firmware remotely

Postby pepino » Thu Feb 05, 2015 10:43 am

Hi,
I need use the pico interface but my firmware version is 1.00.
My problem is I can only access remotely to RPi+UPIS. Is there any way to put the UPIS in bootloader mode to update firmware with de python script?
Thank!
pepino
 
Posts: 8
Joined: Thu Feb 05, 2015 10:37 am

Re: Uploading firmware remotely

Postby Pimaster » Thu Feb 05, 2015 12:10 pm

Hi,

If your system is powered from EPR or UPiS USB then try to do this one

sudo i2cset -y 1 0x6b 0x00 0xff && python picofu.py -f UPS_PIco.hex

it is same for the both UPiS and UPiS, however the PICo interface (i2c) has been implemented in later versions, so you need the first time to upload it manual and then use provided solution

Warmest Regards
PiMaster

[EDIT] I have not tested it remotely, but this is way we are uploading the firmware via SSH from command line. This remote upgrade will be completely solved in the firmware 2.0
Warmest Regards
PiM
---
Designing with Mentor Graphics PADS - www.pads.com
Please read and follow the PiForum rules
http://www.forum.pimodules.com/viewtopic.php?f=13&t=196
---
Pimaster
Site Admin
 
Posts: 1581
Joined: Fri Sep 14, 2012 7:50 am

Re: Uploading firmware remotely

Postby pepino » Thu Feb 05, 2015 12:41 pm

Thank!
pepino
 
Posts: 8
Joined: Thu Feb 05, 2015 10:37 am


Return to New Python Firmware Uploading Script

Who is online

Users browsing this forum: No registered users and 1 guest